So it was time to start cleaning up parts. Paint wise I’ve stuck with POR15 and Eastwoods. Both are avaliable from www.frost.co.uk.
For the fuel pump, alternator bracket and a few other parts I’ve used Eastwoods Primer and Eastwoods silver cad. Its a matte silver and looks and holds well. Below is the fuel pump before and after. The process was degrease, wash with water, wire wheel, degrease again, wash, prime, paint.
For the horn, coolant clips, brake servo and hoses I stuck with Eastwoods underhood satin black. Find it here: Eastwood Satin Black (Underhood)
Below is a photo of the brake servo and master cylinder overhauled.
Unfortunately in my eagerness I didnt take any before and after shots. Below is a shot of the water pump, alternator bracket, engine brackets, fuel pump, heater matrix cover and a hose clip. Would highly recommend the paint, but as always its all in the prep work.
